top of page

Gas Test.

The gas piping system must be tested with a diaphragm test gauge

1 h
125 US dollars
Customer's Place

Service Description

The gas piping system must be tested with a diaphragm test gauge that is approved by the Plumbing Code. The tests consist of applying a test pressure of three (3) psig, the plumbing inspector must witness this test, and the test must be maintained for a minimum of 15 minuets. The test must include all the fuel gas piping starting at the gas meter and include the yard service and all structures located on the property. The plumbing inspector will need access to all structures and is required to inspect all fuel gas supplied appliances to insure proper installation and meet minimum safety requirements. The structure is required to have approved vented heating equipment that is capable of maintaining a minimum habitable temperature of 70º degrees F, three (3) feet above the floor within the structure prior to the fuel gas meter being released. Heating equipment that is installed that has a 5 B.T.U.'s input for each cubic foot of occupied space will be considered adequate to meet this requirement. Upon completion of the plumbing inspection and approval the plumbing inspector give a release for the fuel gas service to be connected or re-connected.


Cancellation Policy

All inspections must be booked 24 hours in advance . if a same day inspection is required . please contact us for more information on availability


Contact Details

346 366 4900

hawkeyewoodlands@gmail.com

11 Canterborough Place, Tomball, TX, USA


Call or Text

(346) 366 4900

©2020 by Hawk Eye Inspections. Proudly created with Wix.com

bottom of page